Cisco 300-135 TSHOOT exam sample questions | Certpark

Certpark providing Cisco 300-135 TSHOOT exam sample questions can not only help you 100% pass the exam, but also provide you a free one-year update service.Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don’t doubt yourself. 

Share some CCNP 300-135 exam questions and answers below.
The fault condition is related to which technology?

A. NTP

B. IPv4 OSPF Routing

C. IPv6 OSPF Routing

D. IPV4 and IPV6 Interoperability

E. IPv4 layer 3 security

Answer: D

What is the solution of the fault condition?

A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command

B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.

C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command

D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command

Answer: A

Ticket 5 R1ACL

TROUBLE TICKET STATEMENT:

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).

show run by yourself to obtain the following information:

Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.

Configuration on R1

! interface Serial0/0/0/1

description link to ISP

ip address 209.65.200.224 255.255.255.252

ip access-group edge_security in

ip nat outside

ip virtual-reassembly

ntp brasdcast client

net broadcast key 1

no cdp enable

!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255

ip access-list nat_traffic permit 10.2.0.0 0.0.255.255

! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any

ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any

ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any

ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any

ip access-list edge_security permit ip host 209.65.200.241 any

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

Answer: A

What is the solution of the fault condition?

A. Under the interface Serial0/0/0 configuration enter the ip nat inside command

B. Under the interface Serial0/0/1 configuration enter the ip nat outside command

C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command

D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command

Answer: C

The fault condition is related to which technology?

A. NTP

B. IP DHCP Server

C. IPv4 OSPF Routing

D. IPv4 EIGRP Routing

E. IPv4 Route Redistribution

F. IPv6 RIP Routing

G. IPv6 OSPF Routing

H. IPV4 and IPV6 Interoperability

I. IPv4 layer 3 security

Answer: G

What is the solution of the fault condition?

A. Under the interface Serial0/0/0 configuration enter the ip nat inside command

B. Under the interface Serial0/0/1 configuration enter the ip nat outside command

C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command

D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command

Answer: C

What is the solution to the fault condition?

A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.

B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.

C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.

D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.

Answer: D

What is the MTU¡¯s size in a GRE tunnel?

A. 1630

B. 1476

C. 1500

D. 1900

Answer: B

What is the solution of the fault condition?

A. Under the BGP process,enter the bgp redistribute-internal command

B. Under the BGP process, bgp confederation identifier 65001 command

C. Delete the current BGP process and reenter all of the commands using 65002 as theAS number.

D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.

Answer: D

The tunnel between R1 and R3 is not coming up. Which two statements are true? (Choose two)

(Topology with a GRE tunnel and the outputs provided are show ip int brief and tunnel source and destination)

A. Tunnel source int Eth0/0 is down

B. No route from R1 to R3 loopback0 (tunnel destination)

C. source and destination not in same subnet

D. http://bbs.hh010.com/

Answer: AB

We can guarantee that you can pass the Cisco 300-135 exam the first time. If you buy the Cisco 300-135 TSHOOT exam sample questions of Certpark, then you always be able to get newer and more accurate test information. The coverage of the Cisco 300-135 TSHOOT exam sample questions of Certpark is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.Now in this time so precious society, I suggest you to choose Certpark which will provide you with a short-term effective Cisco 300-135 TSHOOT exam sample questions, and then you can spend a small amount of time and money to pass your first time attend Cisco certification 300-135 exam.

Leave a Comment

Your email address will not be published. Required fields are marked *